Need help?Do you have a question about the Mackie THUMP GO and is the answer not in the manual?
Diagram for connecting two speakers in stereo for optimal sound reproduction.
Guide for connecting a microphone and linking multiple speakers.
Important advice and reminders for safe and effective setup and use.
Example setup for a solo musician performing with a guitar and microphone.
Setup example for casual gatherings and parties using multiple speakers.
Example setup for a small venue using a mixer and two speakers.
Instructions on how to link multiple Thump GO speakers together using the THRU output.
Details on connecting the detachable power cord to the IEC power connector.
Explanation of the four speaker modes and how to select them for different applications.
Instructions for connecting Bluetooth devices and pairing with Thump GO loudspeakers.
Guide on how to link two Thump GO loudspeakers together for stereo or zone linking.
Procedure for resetting the Thump GO to its default factory settings.
Instructions and safety precautions for replacing the internal lithium-ion battery.
Explanation of built-in limiter, dynamic bass response, and thermal shutdown features.
Details on the subsonic filter circuit preventing woofer damage from low frequencies.
Guidelines for cleaning, protecting from moisture, and general upkeep of the loudspeaker.
Tips for optimal speaker placement and dealing with room acoustic challenges.
Common issues and solutions for power, sound, noise, and Bluetooth connectivity problems.
Detailed specifications including acoustic performance, power, and construction features.
Visual representation of the internal signal flow and components of the Thump GO.
Physical dimensions and weight of the Thump GO loudspeaker.
Diagram for connecting two speakers in stereo for optimal sound reproduction.
Guide for connecting a microphone and linking multiple speakers.
Important advice and reminders for safe and effective setup and use.
Example setup for a solo musician performing with a guitar and microphone.
Setup example for casual gatherings and parties using multiple speakers.
Example setup for a small venue using a mixer and two speakers.
Instructions on how to link multiple Thump GO speakers together using the THRU output.
Details on connecting the detachable power cord to the IEC power connector.
Explanation of the four speaker modes and how to select them for different applications.
Instructions for connecting Bluetooth devices and pairing with Thump GO loudspeakers.
Guide on how to link two Thump GO loudspeakers together for stereo or zone linking.
Procedure for resetting the Thump GO to its default factory settings.
Instructions and safety precautions for replacing the internal lithium-ion battery.
Explanation of built-in limiter, dynamic bass response, and thermal shutdown features.
Details on the subsonic filter circuit preventing woofer damage from low frequencies.
Guidelines for cleaning, protecting from moisture, and general upkeep of the loudspeaker.
Tips for optimal speaker placement and dealing with room acoustic challenges.
Common issues and solutions for power, sound, noise, and Bluetooth connectivity problems.
Detailed specifications including acoustic performance, power, and construction features.
Visual representation of the internal signal flow and components of the Thump GO.
Physical dimensions and weight of the Thump GO loudspeaker.
General| Power Output | 200W |
|---|---|
| Battery Life | Up to 12 hours |
| Bluetooth | Yes |
| Powered | Yes |
| LF Driver Size | 8" |
| HF Driver Size | 1" |
| Enclosure Material | Polypropylene |
| Weight | 17.6 lb (8 kg) |
| Frequency Response | 50 Hz - 20 kHz |
| Outputs | 1 x XLR |
| Inputs | 2 x XLR/TRS combo, 1 x 3.5mm AUX |
| Type | Portable PA Speaker |
| Mounting Options | Pole mount |
To Next Page