Need help?Do you have a question about the macnil GT ALARM GT1009CB and is the answer not in the manual?
Explains how to configure the yellow/black wire output using dip switches 6 and 7 for various functions.
A table detailing output configurations for the yellow/black wire based on switch positions.
Guides on placing and connecting the ultrasonic sensor capsules for optimal coverage.
Specific instructions for wiring the GT843 siren to the control unit and power source.
Specific instructions for wiring the GT944 self-powered siren.
Specific instructions for wiring the GT945 self-powered radio siren.
A comprehensive table detailing all system functions configurable via dip switches.
Specific table for configuring the yellow/black wire output based on switch positions.
Details how to perform the Quick Test function to verify system installation and lines.
Table summarizing alarm causes and corresponding LED/beep signals during the Quick Test.
Procedure for self-learning up to 4 electronic keys for the alarm system.
Refers to the configuration options for the yellow/black wire output.
Step-by-step guide for the automatic CAN bus configuration process.
Procedure for the system to learn analog signals for alarm on/off.
Procedure to perform self-learning for the GT945 siren.
Table outlining selectable functions for the GT949 module via its 4-way dip-switch.
Procedure for binding remote controls, electronic keys, and radio sensors to the GT949.
General| Category | Automobile Accessories |
|---|---|
| Model | GT1009CB |
| Remote Control | Yes |
| Anti-Theft Protection | Yes |
| Shock Sensor | Yes |
| Installation Required | Yes |
| Compatibility | Universal |
| Brand | macnil |
To Next Page