Mactronic Noise XTR 04 User Manual

/ EN
USER MANUAL
SPECIFICATION
Light Source Cree™ XM-L2 LED 712 lm
Runtime and
Operation Modes
High 712 lm – 2 h 45 min
Medium 368 lm – 5 h 30 min
Low 77 lm – 28 h 30 min
Boost 854 Lm - 30 sec
Power Supply 18650 Li-ion 3.7V; 3400 mAh
Dimensions 119 × 43 × 36 mm
Weight 185 g
IP IP 64
Charging 6 h
Shockresistant 1 m
Beam Distance 157 m
Thank you for choosing an Adventure series bike lamp.
To ensure the highest durability and reliability of the device ple-
ase operate and maintain it properly. Please read this manual
and keep it for future reference, as it contains important infor-
mation on safe handling and operation of the device.
Make sure that only original parts designed for Mactronic
®
devi-
ces are used. The use of spare parts produced by other manufac-
turers may adversely affect the product’s quality and parame-
ters.
OPERATION:
ON / OFF
Click the
ON / OFF
switch to activate the head lamp in the follo-
wing modes: 100% → 50% → 10% → Flashing → Off.
The modes are changed fluently, by pressing the
ON / OFF
switch.
BOOST
To use the BOOST mode keep the
ON / OFF
switch pressed for 3
seconds, upon which the lamp will switch from the current mode
to Boost, keep working in this mode for 30 s, and will then revert
to the previously selected mode.
POWER SUPPLY:
The lamp is powered by a 3.7 V, 3400 mAh accumulator
Battery Life Indicator
The accumulator life is indicated by an LED in the
ON / OFF
switch.
Battery Life
Indicator
Battery Charge
Indicator
NOISE
XTR 04
The LED operates as follows to indicate the accumulator life:
BLUE - 100%-80% life remaining
GREEN - 79%-40% life remaining
RED - 39%- 0% life remaining
Battery Charge
Indicator
During charging, the LED indicator in the
ON / OFF
button
shows the charging status with the Red/Green LED, as shown
below:
RED - charging
GREEN - accumulator fully charged, disconnect the charger
Last Setting Memory
The head lamp has a memory function and when switched on,
it activates in the last mode selected before it was switched off.
Keep the switch pressed for 3 seconds (when the head lamp is
off) to lock it - this function prevents it from switch on accidental-
ly. To unlock the head lamp, keep the switch pressed for
3 seconds.
CHARGING THE ACCUMULATOR:
NOISE
XTR 04
Micro USB
Make sure to charge the accumulator fully before using the lamp
for the first time.
To charge the lamp‘s accumulator:
1. Switch the flashlight off.
2. Connect the lamp to your PC via the USB cable or charge it via
ABF0042

Mactronic Noise XTR 04 Specifications

General

Brand	Mactronic
Model	Noise XTR 04
Category	Bicycle Accessories
Language	English

Summary

Specifications

Light Source

Runtime and Operation Modes

Lists operating modes (High, Medium, Low, Boost) and their durations.

Power Supply

Specifies the type and capacity of the accumulator used.

Charging Time

Beam Distance

Operation

On/Off Functionality

Explains how to turn the lamp on/off and cycle through modes by clicking the switch.

Boost Mode Activation

Describes how to activate the high-power Boost mode by holding the switch.

Battery Life Indicator

Charging Status Indicator

Last Setting Memory

Switch Lock Feature

Explains how to lock/unlock the switch to prevent accidental activation.

Charging the Accumulator

Charging Procedure

Details steps for charging the accumulator via USB from a PC or adapter.

Accumulator Replacement and Handling

Accumulator Information

Safety Precautions

General Safety Warnings

Lists essential safety warnings for using the headlamp and its components.