Need help?Do you have a question about the Macurco CM-E1 and is the answer not in the manual?
General| Interconnectable | Yes |
|---|---|
| Detected gas types | Carbon monoxide (CO) |
| Built-in display | No |
| Quantity per pack | 1 pc(s) |
| DC input voltage | 9 - 32 V |
| Power source type | DC |
| Operating temperature (T-T) | 4.4 - 37.8 °C |
Weight and Dimensions| Depth | 133.3 mm |
|---|---|
| Width | 44.45 mm |
| Height | 82.5 mm |
| Weight | 0.45 g |
Detailed information on the CM-E1 Carbon Monoxide Detector, its features, and applications.
Overview of the CM-6 Carbon Monoxide Detector and related CO health effects.
Information on the GD-2B detector for combustible gases.
Details on the GD-2A detector for combustible gases.
Specifics of the HD-11 Hydrogen Gas Detector.
Details on Propane (LP) gas, its properties, and common sources.
Information on Methane (Natural Gas) properties and typical sources.
Properties and common sources of Hydrogen gas.
Description of the Duct Mount Kit DMK-1 for monitoring gas concentrations.
Details on the PS-12 plug-in power supply transformer.
Information on the CM-E1 Adaptor Kit for conversion.
Details on the CME1-PCA Wire Harness for the CM-E1 detector.
To Next Page
