Need help?Do you have a question about the Macurco GD-2B and is the answer not in the manual?
Details the CM-E1, a low voltage Carbon Monoxide detector for UL listed fire alarm/burglary control panels.
Details the GD-2B, a low voltage detector for combustible gases, designed for fire alarm/burglary control panels.
Details the GD-2A, a low voltage detector for combustible gases for UL listed fire alarm/burglary control panels.
Details the HD-11, a low voltage detector for Hydrogen gas, designed for connection to fire alarm/burglary control panels.
Kit for monitoring gas concentrations in ventilation ducts.
120VAC to 12VDC transformer accessory.
Adaptor plate kit for detector conversion.
Replacement 6-conductor pigtail cable for CM-E1.
General| Type | Fixed Gas Detector |
|---|---|
| Detection Method | Electrochemical Sensor |
| Weight | 0.5 lbs |
| Power Supply | 12-24 VDC |
| Battery Life | Not Applicable |
| Output | 4-20 mA |
| Alarm Relay | SPDT |
| Operating Temperature | -20°C to 50°C |
| Dimensions | 4.5" x 3" x 1.5" |
| Certifications | UL Listed |
| Humidity Range | 5-95% RH non-condensing |
To Next Page
