What to do if MAD DOG Mouse cursor freezes?
If the MAD DOG Mouse cursor freezes or doesn't move, it might be due to a dirty optical sensor on the bottom of the mouse. Try cleaning the underside of the mouse. Alternatively, the surface you're using the mouse on could be affecting the sensor. Using a mouse pad is recommended.
Why MAD DOG Mouse is not working?
If your MAD DOG Mouse isn't starting, ensure the plug is correctly connected to the computer. Also, give the computer time to install the device driver after connecting the cable plug to the USB connector.
How to adjust cursor speed on MAD DOG GM315?
If the MAD DOG Mouse cursor moves too fast or slow, it means the DPI resolution is either too high or too low. Adjust the DPI resolution by pressing the button on the bottom of the device.
Key safety guidelines for using the device, including handling, environment, and user age restrictions.
Welcome message, importance of reading the manual, and intended use of the device.
Detailed labeling of all physical buttons, scroll wheel, sensor, and other parts of the mouse.
Technical specifications including model, sensor, connection interface, DPI, polling rate, and compatibility.
Steps for connecting the mouse to a computer and driver installation for initial operation.
Guides for DPI settings, RGB backlight control, and software installation.
Instructions on reassigning buttons, creating custom macros for repetitive tasks.
How to adjust mouse parameters, edit backlight, and manage saved settings.
Guidelines for cleaning, storing the device, and responsible disposal methods.
Solutions for common problems like device not starting, slow cursor, or freezing.
Details on warranty period, coverage exclusions, repair/replacement policy, and validity.
General| Connectivity | Wired |
|---|---|
| Sensor | Optical |
| Buttons | 6 |
| Model | GM315 |
| DPI | 3200 |
| Connection | USB |
| Interface | USB |
To Next Page