To Next PageTo Next Page
Need help?Do you have a question about the Mad Professor Deep Blue Delay and is the answer not in the manual?
General| Effect Type | Delay |
|---|---|
| Bypass | True Bypass |
| Technology | Analog |
| Controls | Delay, Repeat |
| Power Supply | 9V DC |
| Input | 1/4" Jack |
| Output | 1/4" Jack |
| Delay Time | 25ms - 450ms |
| Input Impedance | 500 kOhm |
Current draw of the pedal varies between 25-32 mA based on delay setting.
Operates between 8V and 15V; signal mutes below 7.5V.
Input impedance is 180K ohms, output drive capability is 10K ohms.
Max input voltage 2V peak, S/N ratio 80 dB, delay time 25-450 ms.
Powered via 2.1mm DC socket; uses 1/4" phone jacks for connections.
Features complete bypass with circuit input grounded when in bypass.
Can be powered by a 6F22 9V battery or a DC eliminator.
Protected against incorrect DC eliminator polarity; low voltage causes fuzzy sound.
Meets EN standards, RoHS, WEEE; includes a 1-year limited warranty.
Digital/analog delay with analog direct signal path, classic tape echo bandwidth.
Focus on natural decay, minimal filtering, and suitability for distorted tones.
Chosen for compactness, stability, and service-free operation compared to analog.
Adjusts the volume of the delayed signal mixed with the dry signal.
Sets the delay time, ranging from 25 ms (CCW) to 450 ms (CW).
Controls the number of repeats, from one (CCW) to infinite feedback (CW).
