Madison Park ASPEN BUTTON TUFTED STORAGE OTTOMAN User Manual

Page 1 of 2
Description
QTY
Parts List
Item
P1
P2
Step 1. Take out four legs and washers from thr box which is in the ottoman.
Thank you for your purchase
Hardware List
QTY
Item
H1
Pre-assembly:
Take out all parts and hardware from box.
Do not discard any content until assembly is complete to avoid accidentally discarding small parts or hardware.
Important safety instructions:
Please read carefully all instructions before assembly.
For your safety and ease, assembly by two or more adults is recommended.
Keep instructions for future use.
R
ASSEMBLY INSTRUCTIONS
Description: ASPEN BUTTON TUFTED STORAGE OTTOMAN
Assembly Procedures:
DISCLAIMER:
WHEN PROPERLY ASSEMBLED, THIS ITEM IS SAFE FOR INTENDED USE. SELLER IS NOT LIABLE FOR
ANY DAMAGES RESULTING FROM ITEM BEING IMPROPERLY ASSEMBLED AFTER PURCHASE.
P2
P1
H1
LEGS
OTTOMAN
PLASTIC WASHERS
Description
4 PCS
1 PC
4 PCS

Madison Park ASPEN BUTTON TUFTED STORAGE OTTOMAN Specifications

General

Brand	Madison Park
Model	ASPEN BUTTON TUFTED STORAGE OTTOMAN
Category	Indoor Furnishing
Language	English

Summary

Important Safety Instructions

Pre-assembly

Assembly Procedures

Step 1: Parts Identification

Take out four legs (P1) and washers (H1) from the box located inside the ottoman.

Assembly Steps and Safety Notes

Step 2: Attaching Legs

Screw the four legs (P1) into the base holes, ensuring they are tight and at the correct angle.

Step 3: Final Placement

Level the storage box and place it upright on a stable, level surface.

Periodic Bolt Tightening Advisory

Bolts may loosen; inspect and retighten every 3 months for stability and safety.