5
Instructions
First, turn on the main switch, and then put the scale on a flat table. The digital display will
return to 0 after self-checking. If the weight is not zeroed because of uneven table, please
short press the right button to reset it.
If you want to switch the units, please double click the right button. This switches between
ounces and grammes.
For timing, please click the left button to start timing (the maximum timing is 99 minutes and
99 seconds). Click again to pause the timing, and then click again to resume timing. Double
click the left button to return to zero.
Long press the right button to enter the automatic timing mode (this is indicated with water
drop icon appearing). Fixed weight on the scale surface will not start the timing. The timing
will be automatically started only when continuous water flow is detected, and the timing will
stop when the water flow stops. At this time, if you click the left button, the timing and
weighing will be cleared to zero, and you can pour the water again for timing and weighing,
and long press again to exit the automatic timing.
The coffee scale will automatically go to sleep after standing on the table without any
operation for five minutes. Short press the power button to turn it on again. You can also
long press the power button to turn it off manually.
When the coffee scale is low on power, the display screen will display “L0”; while it is being
charged, it will display “—“. Fully charged device will be indicated with “FULL” displayed on
the display. Charging voltage is 5V.
The coffee scale cannot be charger or operated when the main switch is set to off.
To Next Page
Loading...