Rinse the water tank then lling with potable water. (Fig. 3)
When buttons stop blinking and shows steady light, the machine is
ready for use. (Fig.7)
Turn the machine ON by connecting the plug into mains, both coee buttons
blink for three times then lights go out. (Fig. 5)
Press any coee button to start heating up with continually lights blinking for
approximately 40-50 seconds (Fig.6)
Install water tank, drip tray and capsule container in proper position on the
machine. (Fig.4).
Press and hold Espresso and Lungo buttons simultaneously to turn OFF the
machine. (Fig.8)
OPERATION
Using your coffee machine for the first time
Confirm whether any accessories are missing and the appliance is not damaged. Then clean the
inner parts, then install and operate the machine as per following steps with diagrams.