Maestro MR-793 - Using the Multi-Cooker; Preparation and Control Panel

6
immediately stop use the device, unplug the device, appeal to the nearest service center.
Description of the appliance
Picture1 (page 2)
1. Steam tank
2. Bowl with non-stick coating
3. Housing
4. Lid
5. Steam valve
6. Moisture collector
7. Control Panel
8. Heating element
Control Panel
Preparation for work
Using every time before:
- The outside of inner pot should be clean dry especially the base, ensure there is nothing
between inner pot and heating plate;
- Put inner pot in the body suitable;
- Turning inner pot, ensure the bottom of inner pot and heating plate and sensors have good
contacts.
- Connect the electricity
- Don’t connect the electricity if you haven’t nished the above steps.
General Instruction
MULTI COOKER has 42 programes