Maestro MR792 - Page 9

9
10 Soup 1 hour 100
From 10 min to 8
hours /
step 5 min
00:30-
24:00
11 Baking 55 min 140
From 10 min to 2
hours /
step 5 min
00:30-
24:00
12 Multichef 30 min 100
From 2 min to 15
hours /
step 1 min
00:30-
24:00
13 Pasta 8 min 115
From 2 min to 1
hours/
step 1 min
14 Meat
1 hour 30
min
100
From 10 min to 8
hours /
step 5 min
00:30-
24:00
15 Cupcake 50 min 130
From 10 min to 8
hours /
step 5 min
00:30-
24:00
16 Steamer 30 min 115
From 5 min to 2
hours /
step min
17 Heating 90
Standard operations, program selection.
Before starting any one of the programs, inspect the multicooker and the bowl.
Make sure that the bottom of the bowl and the surface of the heating element in the
multicooker camera are clean, without undesired objects.
Put the products into the bowl.
Set the bowl into the multicooker camera, slightly rotate it counterclockwise to ensure a
tight touch of the bottom of the bowl and the heating element.
Close the lid until the latch snaps into place.
Connect the multicooker to an electrical outlet.
Turn on the multicooker by pressing the buttons “Power on / o󰀨” pos.7 Fig. 2.
The multicooker has 17 basic programs installed. For selecting and running the required
program, please take the following steps:
1) Press the “Menu” button until the indicator light of the needed program is highlighted.
The cooking time of this program will be indicated on the display and applied by default.
2) Press the button “Start” to conrm and start the selected program. On the display will
start the time count backwards; the multicooker will carry out a programme.
3) At the end of the selected program will sound the signal and the multicooker will
automatically pass to mode “Heating” (Heating mode is not available for the Yogurt
program). This will be indicated by the bb indicator on the display.
EN