9
Troubleshooting
Phenomenon Cause Troubleshooting method
The running
machine stops
suddenly
A. Whether the power
plug is properly
inserted
B. The quantity of
materials put into the
machine is too large
C. Hard fruits and
vegetables are not cut
A. Make the plug inserted into the
socket
B. If the machine still does not run,
please clean the machine and then
use it.
C. Hard fruits and vegetables (such as
carrot) shall be squeezed after being
cut into strips.
The juice
amount is
small or juice
ows out of the
mainframe
A. Dry materials stored
in refrigerator are used
for squeezing
A. The juice amount will increase if the
materials are squeezed after being
immersed in clear water for sucient
water absorption.
There is
abnormal noise
A. Accessories are not
properly installed
B. The machine is put
on oblique ground
C. Parts cause
extrusion sound during
squeezing
A. Inspect whether the accessories are
properly installed after the machine
stops
B. Please put the machine on a plane
C. This is the sound caused by
extrusion of fruits and vegetables, and
please do not worry about it.
The container
and accessories
are dyed after
use
A. Dreg attaches to the
container
B. The container and
accessories are liable
to be dyed when
materials with pigment
(such as carrot,
spinach, etc.) are used
for squeezing.
A. Clean the machine in time after use
B. Clean the machine with detergent
after it is wiped with edible oil.
EN
To Next Page
Loading...