Need help?Do you have a question about the MAG VAMPIRIC 300R and is the answer not in the manual?
General| Form Factor | Mid Tower |
|---|---|
| Motherboard Support | ATX, Micro-ATX, Mini-ITX |
| Expansion Slots | 7 |
| Maximum CPU Cooler Height | 160 mm |
| Drive Bays | 2 x 2.5", 2 x 3.5" |
| Cooling Support | Front: 3x 120mm / 2x 140mm; Top: 2x 120mm / 2x 140mm; Rear: 1x 120mm |
| Radiator Support | Rear: 120 mm |
| Maximum PSU Length | 220 mm |
Details USB Type-C, USB Type-A, Mic in, and Audio out ports.
Includes Power and Reset buttons for system operation.
Used to manage LED lighting effects.
Guide for installing a 3.5-inch Hard Disk Drive.
Guide for installing 2.5-inch Solid State Drives or Hard Disk Drives.
Instructions for opening the left and right side panels.
Steps for installing the motherboard into the chassis.
Steps for installing a graphics card.
Instructions for installing the Power Supply Unit.
Guide for connecting ARGB fans and understanding LED control.
Explanation of how to use the LED switch for effects.
Details on dimensions, LED type, connectors, and pin definition.
Lists available LED effects controllable via short press.
To Next Page