Seat Assembly Instructions (continued)
Step 3:
Place the seat on the kayak. Loosen the
thumbscrews on both sides of seat until there is a
visible gap between the track nut and the bottom of
the plastic seat track fitting.
Align the track nuts with the opening in the center
of the tracks on both sides of the kayak.
Drop the fittings into the track and slide forward or
backward until clear of the opening
Step 4:
Adjust seat to desired position.
Tighten the thumbscrews by turning to clockwise
securely fasten the seat to the kayak
Page 13 of 29
To Next Page
Loading...