12
en
Bluetooth
2
Cyclo works with phones which are “Bluetooth Smart Ready”. This
includes phones running iOS-4 and newer, Android™ 4.3 and
newer
3
, and certain Windows phones.
To pair your phone:
1. Go to Settings > Phone
2. Tap Enable, then Pair with New Phone.
3. Follow your phone’s procedure for pairing. Cyclo will display an error
message if the phone is not equipped with Bluetooth LE.
When the phone feature is enabled, the main menu changes to show
MP3 Player controls. The controls are only active when a phone is
paired and connected.
WiFi
4
Permits wireless sync with a computer and MagellanCyclo for updates, to share
experience, and more.
You must register your Cyclo on MagellanCyclo.com before you can use WiFi to
synchronize data.
To connect, go to Settings:
1. Tap WiFi Sync. The device will present a list of available wireless networks.
2. Select the network you want to use.
3. Select the security type.
4. Tap the password field and enter the password.
5. Tap to connect.
When it connects, a message window is shown while it syncs. When it is done, the sync
result is displayed.
Tap OK to return to the settings screen. The WiFi connection is closed, but the connection
information is remembered for future use.
2 If equipped: Not all models support Bluetooth.
3 Not all phones with Android 4.3 will necessarily be equipped for Bluetooth LE.
4 If equipped: Not all models support WiFi.
Cyclo315-505 Series_QSG.indb 12 4/18/2014 12:48:24 PM
To Next Page
Loading...
Need help?
General