3
• Do not use parts or accessories from
other manufacturers or dierent
models of magic bullet
®
products. Use
of parts and accessories NOT provided
by magic bullet
®
may damage your
unit or cause serious injury.
• Use only genuine magic bullet
®
attachments/accessories specifically
designed for your magic bullet
®
Blender. Aftermarket parts are not
made to magic bullet
®
specifications
and may damage your unit or cause
serious injury.
• Do not attempt to defeat any safety
interlock mechanisms.
• DO NOT USE OUTDOORS.
• ALWAYS UNPLUG THE MAGIC
BULLET
®
BLENDER WHEN NOT IN USE.
öôêïèõéæãíæïåêïèñêõäéæó
warning!
BEFORE STARTING A
BLENDING CYCLE, ALWAYS AFFIX
THE VENTED PITCHER LID TO THE
BLENDING PITCHER WITH THE
CAP TWISTED CLOSED. THIS WILL
PREVENT INGREDIENTS FROM
SPLASHING AND HOT INGREDIENTS
FROM SPLATTERING, WHICH MAY
CAUSE BURNS, BODILY INJURIES, OR
PROPERTY DAMAGE.
• After blending hot ingredients or
liquids, exercise caution when opening
the Pitcher Lid; hot steam may escape,
or hot ingredients may splatter.
• Do not overfill the Blending Pitcher
beyond the MAX line.
warning! PRESSURIZED STEAM
RELEASED FROM HOT LIQUIDS
DURING BLENDING CAN CAUSE THE
LID TO ERUPT FROM THE BLENDING
PITCHER. TO PREVENT POSSIBLE
BURN INJURIES, DO NOT FILL THE
PITCHER BEYOND THE MAX LINE.
warning! TO INCORPORATE
INGREDIENTS DURING BLENDING,
OPEN THE VENTED CAP AND
CAREFULLY POUR OR DROP
INGREDIENTS INTO THE MIXTURE.
• NEVER LEAVE THE MAGIC BULLET
®
BLENDER UNATTENDED WHILE IT
IS IN USE.
• Do not place or operate your
magic bullet
®
Blender on uneven or
unstable surfaces.
• The risk of fire, shock or damage
to magic bullet
®
Blender during
cleaning can be reduced by taking the
following precautions:
– Unplug and turn your device o
before cleaning.
– Only clean the exterior of
your device.
– Clean your device with a dry cloth.
• Do not attempt to clean the Motor
Base by immersing it in water or other
cleaning liquids. Only gently wipe and
dry the Motor Base with a clean cloth.
• Do not place any magic bullet
®
part or accessory in a microwave,
conventional oven, air fryer, or
stovetop pot, or immerse in boiling
water, as this will damage the part.
• Do not place or operate your magic
bullet
®
Blender on or near a hot gas or
electric burner, or in a heated oven.
• NEVER wash your magic bullet
®
parts
or accessories using the sanitize or
heat cycle of your dishwasher. Doing
so can warp the part, which can
create hazardous conditions during
use that may result in bodily injury or
property damage.
• NEVER place any magic bullet
®
parts
or accessories in the freezer or use as
a storage container in the freezer.
• Make sure your magic bullet
®
Blender
is powered o, unplugged, and
the motor and blades are
completely stopped before
removing or cleaning the unit.
• Remove and safely discard any
packaging material or promotional
labels before using the appliance for
the first time.
• Do not operate if any of the parts
and accessories are damaged in any
manner which may impair proper
function or create a safety hazard.
Contact Customer Service for
assistance at: 1 (800) 523-5993.
MBFXX100_Blender_UG_F240118.indd 3 1/18/24 11:02 AM
To Next Page
Loading...
