4
warning! ALWAYS USE CAUTION
WHEN OPENING THE VENTED
CAP IF THE BLENDED MIXTURE IS
HOT OR WARM, AND BE MINDFUL
OF ESCAPING STEAM OR THE
SPLATTERING OF HOT INGREDIENTS.
ALWAYS SECURELY REATTACH THE
VENTED LID CAP AFTER ADDING
INGREDIENTS.
• When using manual speeds, always
start blending on the LOW setting to
integrate ingredients, then increase
speed as needed.
ãíæïåêïèñêõäéæóôâçæõú
Proper use of the Blending Pitcher is
important for the safe operation of
your magic bullet
®
Blender. Using the
Blending Pitcher inconsistent with these
instructions may result in bodily injury,
property damage, or damage to
your unit.
• Always operate the Blending Pitcher
with the Pitcher Lid securely locked
into place.
• Before blending, check that the vent
slots on the Pitcher Lid are clear and
unobstructed. Clogged or obstructed
vent slots can pressurize contents,
potentially expelling the Lid from
the Blending Pitcher, which can
result in personal injury and property
damage from escaping steam or
hot ingredients.
• For recipes that require certain
ingredients to be incorporated
during blending, first add the base
ingredients, then attach the Pitcher
Lid and begin blending. Once the
ingredients are well mixed, twist open
the Vented Lid Cap and carefully pour
or drop ingredients into the blended
mixture. If the blended mixture is hot
or warm, use caution and open the
Vented Lid Cap slowly, being mindful
of escaping steam or the splattering
of hot ingredients. Always securely
reattach the Vented Lid Cap when you
are finished adding ingredients.
• Do not place hands or utensils inside
the Blending Pitcher. This can result in
severe bodily injury or damage.
• NEVER USE spatulas, spoons, or other
tools that may make contact with
the spinning blade during use. Doing
so can damage the unit, shatter the
Blending Pitcher, and cause severe
bodily injury or property damage.
èæïæóâíãíâåæôâçæõú
warning!
BLADES ARE SHARP!
HANDLE WITH CARE TO AVOID
BODILY INJURY. NON-FOOD
ITEMS OR HARD INGREDIENTS
MAY DAMAGE THE BLADES OF
YOUR MAGIC BULLET
®
BLENDER.
ROUTINELY INSPECT THE
BLADES AND DISCONTINUE USE
IF DAMAGED. OPERATING THE
BLENDER WITH DAMAGED BLADES
OR IN ANY MANNER INCONSISTENT
WITH THESE INSTRUCTIONS
MAY RESULT IN BODILY INJURY,
PROPERTY DAMAGE, OR DAMAGE
TO YOUR UNIT. DO NOT TOUCH THE
SHARP EDGES OF THE BLADES. TO
AVOID LACERATION INJURY, DO NOT
HANDLE OR TOUCH ANY SHARP
COMPONENTS OF THE BLADE.
NEVER STORE EXPOSED BLADES
ON THE MOTOR BASE. EXPOSED
BLADES CAN PRESENT THE HAZARD
OF LACERATION AND SEVERE
PERSONAL INJURY. ALWAYS ATTACH
BLADE TO THE BLENDING PITCHER
WHEN STORING.
• Do not remove the Blending Pitcher
until blades have come to a complete
stop. Removing before the blades
come to a complete stop can cause
damage to the attachments or unit.
• Always POWER OFF and UNPLUG the
unit and wait until the Blade comes to
a complete stop before assembling,
disassembling, changing accessories,
or cleaning.
MBFXX100_Blender_UG_F240118.indd 4 1/18/24 11:02 AM
To Next Page
Loading...
