care & maintenance.
Cleaning the magic bullet Mini
®
is easy. Simply place any of the parts
(except for the Motor Base and Cross Blade) on the top rack of the
dishwasher or hand wash with warm, soapy water and rinse.
step 1: Always power off and
unplug the Motor Base from
the outlet when it is left
unattended, before assembling,
disassembling, changing
accessories or approaching
parts that move in use or when
cleaning. Do not attempt to
handle the appliance until all
parts have stopped moving!
step 2: Make sure the
Blending Cup/Cross Blade is
not attached to the Motor Base.
step 3: Clean the individual
components (Motor Base, Cross
Blade, magic bullet Mini
®
Blending Cups).
motor base:
• To avoid risk of injury, never
use your hands or utensils to
clean the White Actuator Tabs
while the magic bullet Mini
®
is plugged in.
• Never submerge the Motor
Base in water or put in the
dishwasher.
• Do not remove the rubber
or plastic liners inside the
Motor Base.
• Use a sponge or dish cloth
dampened with warm soapy
water to wipe down the inside
and outside of the Motor
Base until clean.
• Pay particular attention to
the actuator tabs on the
inside of the Motor Base to
loosen any stuck or sticky
debris from drips and spills.
If necessary you may use a
small brush to scrub the area
to ensure it is kept clean.
cross blade:
DO NOT REMOVE THE GASKET
AS THIS MAY PERMANENTLY
DAMAGE THE CROSS BLADE
AND CAUSE LEAKAGE
• If after washing as indicated
additional disinfecting is
desired, you may rinse with
a 10% vinegar/water solution.
If, over time, the gasket
becomes loose or damaged,
you may order a new Cross
Blade at getmagicbullet.com
or contact Customer
Service for a replacement
Cross Blade.
• Dry the Cross Blade
completely. It is helpful to turn
the blade on its side in your
dish drainer to ensure both
sides of the Cross Blade are
completely dried.
• We recommend replacing
your magic bullet Mini
®
Cross Blade every 6 months
or as needed for optimal
performance. To order
replacement Cross Blades,
simply visit:
getmagicbullet.com.
blending cups
cups, lids and lip rings:
• These items are all Top
Rack dishwasher safe. We
recommend rinsing them
and giving them a quick
brush with a dish brush to
remove any dried debris
before washing them in the
dishwasher. Never use the
sanitize cycle to wash the
Blending Cups as this may
warp the plastic.
• Regularly check the tabs (3)
on the sides of the Cups for
damage (cracking, crazing,
breakage or rounding).
If the tabs are damaged,
discontinue use and replace
immediately to prevent
possible personal injury.
replacement
parts.
To order additional parts and
accessories, please visit our
website at getmagicbullet.com
or contact customer service at
1 (800) 523-5993.
1514
To Next Page
Loading...
