9
OPERATING INSTRUCTIONS
Making Coffee
1. Open the top cover of coffee maker and fill in the appropriate amount water into the
tank with the carafe. The water level should not exceed the MAX level.
2. Place the funnel into the funnel support and make sure it is assembled correctly. Insert
and position the filter correctly.
3. Add ground coffee into the filter. Usually a cup of coffee needs a leveled spoon of
ground coffee, but you may adjust according to your taste.
4. Insert the carafe on the warming plate.
5. Plug the power cord into the outlet, the LCD will display “12:00“(see Control Panel).
6. Press “ON/OFF” button, the red lamp of RUN will be illuminated. The appliance will
begin working.
Note: While brewing, you may remove the carafe for serving. The appliance will stop dripping
automatically, but the time cannot exceed 30 seconds.
7. Do not open the tank cover when brewing is in progress. The flow back of hot water will
damage the appliance.
8. You can remove the carafe, pour and serve when finished brewing (about one minute
after the coffee stops dripping).
Note: The volume of brewed coffee will be less than the water filled initially since ground
coffee absorbs some water. For Safety, keep the carafe lid closed.
9. Always turn OFF the coffee maker before unplugging the power cord from the electrical
outlet and when the coffee maker is not in use.
Note: Be cautious when pouring the hot coffee.
To Next Page
Loading...
Need help?
General
