7
cleanIng
Md box
Perform BURN-OFF... Once the screen has cooled down, remove the screen.
Clean the RAILS... Dip a Q-Tip in Isopropyl Alcohol (ISO) & gently wipe the rails
clean. Then wipe down the inside of the brass bowl.
If there’s residue on the MONOCLE LENS, you can use a bit
of ISO on it as well.
BUILD-UP on the rails can impede heating...
Avoid building residue on your rails, always load a tiny
dab...enough for single use.
For Best Results: DON’T OVERLOAD material onto the screen
To Next Page
Loading...