Remove the stem from the end of the whip.
Hold securely from glass end and squeeze residue
out of the open end like toothpaste.
Soak in hot water for about 5 minutes to loosen
buildup inside of the whip.
Slide the wood portion off of the whip.
Apply continuous pressure as you work your fingers
along the length of the whip.
FOR FURTHER INFORMATION, CHECK OUT OUR VIDEO TUTORIAL AT: MFLB.IT/HOW2ORBIT
Dry whip thoroughly, then slide wood portion back
onto the whip and reinsert stem.
CLEANING WHIPS
To Next Page
Loading...