Installation Tips:
To clean, wash all accessories with warm soapy water. Wipe the base with a moist cloth.
The base is Aluminum die-cast material. Please avoid scratches by hard objects.
Cleaning :
https://magiccos.afterservice.vip
Scan here to get vip service
TEL: +1 (833) 306 1883
The bowl should be firmly locked to
activate the safety lock. For a new
machine, it may be a little difficult to
lock the bowl on the motor base and
you may need to use some strength.
Make sure that the handle is facing
to the right at a 90 degree angle.
90°
NEVER try to install the bowl with
handle on the left, it can not be
installed! Please install the bowl
with handle on the right.
The lid should be firmly locked as
the left picture shows to make sure
the safety lock is activated.
For better installation, please place
the lid on the bowl with 30 degree
angle between protruding part of the
lid and the handle. Please follow the
directions of "lock and unlock"
symbols on the lid and bowl to lock
and unlock the lid.
30°
Please notice that the directions of
the "lock and unlock" symbols on
the lid and bowl indicate the
directions of locking and unlocking
the lid.
Please lock and unlock the bowl
according to the "lock and unlock"
symbols on the base.
To Previous Page
Loading...
