Magiccos FP408 User Manual

Find the on the base which shows
the start position for the bowl handle
placement.
❷ Find the Start Position for
the Bowl Handle Placement
MAGICCOS STAINLESS STEEL FOOD
PROCESSOR WITH BUILT-IN DRAWER
MODEL FP408
Quick Start Guide
Version 2.0
Please make sure that you have read the manual before attempting the operation.
❶ Unpack
Unpack the box and take out the
contents.
Place the motor base on a flat
surface.
Place the bowl onto the motor base
with handle aligned to the start
position.
❸ Place the Bowl
Turn clockwise to click the bowl lid
into the locked position.
The safety lock buckle on the lid and
handle should be in a same straight
line.
❼ Lock the Bowl Lid
Place the pushers then plug the
appliance into a power supply and
turn ON. Turn the rotary switch to
select the desire speeds, add
ingredients through the feeding chute
while motor is running.
❽ Start Processing
When using chopper blade or dough
blade, mount the assembled drive
shaft and blade assembly into the
bowl.
Mount the Chopper or
Dough Blade Assembly
5A
When using an insert blade, insert the
drive shaft into the bowl first then put
insert blade & holder disc assembly
onto the top of drive shaft.
5B
Mount the Insert Blade
and Holder Disc Assembly
Hold the handle then turn clockwise
to click the bowl into the locked
position with the on the bowl
bottom aligned with the on the
base.
❹ Lock the Bowl
Find the on the lid, align the
with the on the bowl, by the
meantime the safety lock buckle
on the lid is at 2 o'clock position,
then place the lid onto bowl.
❻ Place the Bowl Lid

Magiccos FP408 Specifications

General

Model Number	FP408
Material	Plastic
Frequency	60 Hz
Power	1000 Watts
Voltage	120 Volts

Summary

Quick Start Guide

Unpack and Prepare Base

Unpack the food processor and place the motor base on a flat surface before assembly.

Bowl Handle Placement

Identify the start position on the base for correct bowl handle alignment during placement.

Place and Lock Bowl

Place the bowl onto the motor base, aligning the handle, and turn clockwise to lock it securely.

Mount Blade Assembly

Mount the chopper, dough blade, or insert blade and holder disc assembly into the bowl.

Place and Lock Bowl Lid

Align the lid with the bowl and safety lock buckle, then turn clockwise to lock.

Start Processing

Plug in, turn on, select speed, and add ingredients through the feeding chute while motor is running.

Installation Tips

Lid and Bowl Locking

Ensure correct alignment and clockwise turn for lid and bowl locking mechanisms.

Safety System Activation

Confirm protective cover and safety lock buckle are firmly locked for system activation.

Bowl Handle Orientation

Install the bowl with the handle positioned at a 3 o'clock position (facing right).

Operation Tips

Blade Storage

Store all blades inside the drawer, ensuring they are clean and dry after use.

Pre-Operation Checks

Ensure protection cover and safety lock buckle are locked before turning on the appliance.

Pusher Usage

Use the small pusher alone or with the big pusher assembly for feeding ingredients.

Chopper Blade Installation

Install the chopper blade correctly with the UP side up and secure the drive shaft assembly.

Shaft Assembly Security

Ensure shaft ribs are above rivets for tight installation of the chopper blade and shaft assembly.