To Next PageTo Next PageWhy is my Magickwoods FM.UP240 cabinet/mirror uneven?
Your Magickwoods Indoor Furnishing cabinet or mirror might be uneven due to the hanging hardware or mounting screws not being level. To resolve this, remove the cabinet/mirror from the wall and inspect the mounting screws, making any necessary adjustments. Also, measure the position of the hanging hardware on the back to ensure it is level and adjust if needed.
General| Brand | Magickwoods |
|---|---|
| Model | FM.UP240 |
| Category | Indoor Furnishing |
| Language | English |
Details the specific Concord Upper Unit models, including dimensions and model numbers.
Lists all included parts such as cabinets, mirror, shelf, valance, knob, and hardware with quantities.
Emphasizes the need for two people for safe installation and secure grip during lifting.
Provides guidelines on light usage, weight limits, avoiding direct sunlight, and temperature extremes.
Lists necessary tools like tape measure, drill, level, and optional wall anchors for assembly.
Instructions for determining location, drilling, anchoring, and hanging the left cabinet.
Guidance on attaching the cabinet knob using the provided screw.
Steps to mark, drill, anchor, and attach the mirror to the wall.
Instructions to determine location and repeat steps for hanging the right side cabinet.
Details on positioning and securing the shelf between the two cabinets.
Guidance on positioning and attaching the valance above the cabinets.
Instructions for threading light wires, inserting lights, and connecting to power.
Addresses issues with cabinets or mirrors being higher on one side and provides corrective actions.
Outlines what the warranty covers, its duration, and limitations on defects.
Specifies conditions and damages not covered by the warranty, like improper installation or misuse.
Explains the process for requesting replacement parts or making a warranty claim.
