MAGICO S7 - Unpacking Instructions; Required Tools and Initial Steps

MAGICO S7 USER’S GUIDE
UNPACKING INSTRUCTIONS
1. THE FOLLOWING TOOLS ARE REQUIRED: A
PRY BAR, 3/8” DRIVE RATCHET OR DRIVE
ADAPTER AND CORDLESS DRILL, 9/16” OR
14MM SOCKET, 3/4” OR 19MM SOCKET, 3
PEOPLE.
2. USING A FLAT HEAD SCREWDRIVER OR PRY
BAR, REMOVE THE 6 CLAMPS FROM THE
FRONT OF THE CRATE AND FOLD THE CRATE
DOOR DOWN.
3. USING A 3/8” DRIVE RATCHET OR CORDLESS DRILL WITH A 9/16” SOCKET BIT REMOVE
THE 6 BOLTS FROM AROUND THE BOTTOM OF THE CRATE.