4. WITH TWO PEOPLE LIFT UP ON THE BODY OF THE CRATE AND WALK IT
BACKWARDS AWAY FROM THE
SPEAKER.
5. WITH A 3/8” INCH DRIVE RATCHET AND 3/4” OR
19MM SOCKET BIT SCREW THE BOLT IN FRONT
OF THE SPEAKER UP TO LOWER THE FOAM
RUNNER WHICH THE SPEAKER SITS ON.
6. WITH A 3/8” INCH DRIVE RATCHET AND 9/16”
OR 14MM SOCKET BIT UNSCREW THE TWO
BOLTS DIRECTLY BEHIND THE SPEAKER. THESE
BOLTS HOLD THE RETAINER “WINGS.” AFTER
BOTH BOLTS ARE REMOVED, SWING THE WINGS
OUT AND AWAY FROM THE SPEAKER AND
REMOVE CENTER BRIDGE.
To Next Page
Loading...