MAGICO V2 - Unpacking Your Speakers; Unpacking Procedure Steps

MAGICO V2 User’s Guide
UNPACKING YOUR SPEAKERS
REQUIRED: FLAT-HEAD SCREWDRIVER, 2 PEOPLE.
3. Remove lid of
crate.
4. Carefully remove the walls of the
crate and set down clear of the
speakers.
1. Position the crate close to
the final listening position with
enough room to maneuver the
speakers.
2. Using a
flat
-
head
screwdriver, pry off the ten
metal clamps.
5. Untie drawstring on
bottom of speaker and push
bag back around the sides
of the speaker.
6. Screw the supplied rounded or
pointed feet into the nuts and
then into the four corners of the
bottom of the speaker.