To Next PageTo Next PageWhy is my product sticking to the Magikitch'n MKG48 Griddle?
Product sticking to the Magikitch'n Griddle can occur if the griddle surface is dirty or un-seasoned, so you should clean and season the griddle surface. It can also happen if the cooking times are too short, in which case you should increase cooking times.
What to do if my Magikitch'n Griddle pilot(s) will not light?
If the pilot(s) on your Magikitch'n Griddle will not light, there are several potential causes: 1. The manual gas valve or gas supply may be turned off or disconnected, so check the gas valve and supply. 2. The unit might not be plugged in, so ensure it is. 3. There could be a faulty ignition module or flame sense circuit, requiring replacement. 4. The power switch(s) may be off, or there could be a faulty control transformer, so check these components. 5. The thermostats may be turned to 'Off'; ensure they are turned on.
Why is my Magikitch'n MKG48 Griddle staying hot or overheating?
If your Magikitch'n Griddle stays hot or overheats, check for a thermostat or gas valve failure.
Why does my Magikitch'n MKG48 have inconsistent surface temperatures?
Inconsistent surface temperatures on your Magikitch'n Griddle can be caused by thermostats that are not calibrated; in this case, calibrate the thermostats. Another possible cause is a thermostat or gas valve failure, which would require replacing the faulty component.
What to do if the pilot ready light will not illuminate on my Magikitch'n MKG48?
If the pilot ready light on your Magikitch'n Griddle does not illuminate, it could be due to several reasons: 1. The manual gas valve or gas supply may be turned off or disconnected, so check the gas valve and supply. 2. The unit might not be plugged in, so ensure it is. 3. There could be a faulty ignition module or flame sense circuit, requiring replacement. 4. The power switch(s) may be off, or there could be a faulty control transformer, so check these components.
General| Model | MKG48 |
|---|---|
| Type | Griddle |
| Material | Stainless Steel |
| Power Type | Gas |
| Temperature Range | 200°F to 550°F |
