EasyManuals Logo

MAGIMIX L EXPRESSO User Manual

MAGIMIX L EXPRESSO
24 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #7 background imageLoading...
Page #7 background image
7
Place a fairly wide container under the pipe, press , and turn the selector function to .
Allow the equivalent of a bowlful of water to flow through. To halt the flow, turn the function selector
back to .
Insert the empty filter holder (filter locking device at the back) in the
extractor head, opposite the arrow, and turn it towards the right.
Place a sufficiently wide container under the filter holder and press
. The red indicator light will start to flash and the water will flow
into the bowl.
Stop the flow when the bowl is full by pressing again.
Wait for 10 to 15 seconds before removing the filter holder.
Once the rinsing operation is finished, switch your appliance off by pressing , lift out the
water tank and empty it. Clean the tank, filter holder and filters. Fill the tank with freshly-drawn
water and put it back.
Setting the water hardness level
(Program and Program Automatic models only).
The Expresso Program and Expresso Program Automatic automatically tell you when they need
to be descaled (the indicator light will start to flash), but you must first adjust your appliance
according to the hardness of your water.
1- Measure the hardness of your water (cf. p.13).
2- Adjust the hardness setting on your appliance.
The Expresso has four hardness settings.
Plug your appliance in but do not switch it on. Press for five seconds until the indicator
lights come on.
Keep pressing briefly until you reach the right hardness setting. The hardness level
corresponds to the number of indicator lights that come on (cf. table below).
To memorize the setting and exit the adjustment process, press . All the lights will go out.
NB : If no switch is activated for one minute, the process will automatically be interrupted (the
indicator lights will go out), without affecting the last memorized setting.
Indicator light on. Flashing indicator light. Indicator light off.
NB : When the appliance is delivered, it is programmed to level 3.
You water is… Level Level indicators
Very soft or soft 1
Average hardness 2
Hard 3
Very hard 4
L'Expresso AN 30/07/03 10:11 Page 7

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the MAGIMIX L EXPRESSO and is the answer not in the manual?

MAGIMIX L EXPRESSO Specifications

General IconGeneral
TypeEspresso Machine
Pump Pressure19 bar
MaterialStainless Steel
Power1260 watts
ColorSilver

Related product manuals