Use
Installation of the Car Black Box
Screw the Car Black Box on the top security bolt of the suction
cup car holder. Use the mounting plate (
A
) to fix the camera
in right position.
Open lever (
B
) of the suction cup and press suction cup
firmly against windscreen. Once in position, push down lever
(
B
) completely. The suction cup should now be securely
fastened to the windscreen. To release the suction cup from
the windscreen pull again at tab (
C
) of the suction cup.
To adjust the Car Black Box, slightly release bolts (
E
) from
both pivot joints (
D
) of the holder and adjust position of the
Car Black Box as required. Tighten bolts again.
A
B
C
D
E
E
To Next Page
Loading...