Single Cell AAA Flashlight
Enkelvoudige Cel Zaklantaarn AAA (LR03)
Lampe torche à 1 pile AAA (LR03)
1 Batterie Typ AAA (LR03) Taschenlampe
Linterna de 1 pila AAA
* Item 5 inserts into item 1 * Object 5 wordt in object 1 gebracht * La pièce 5 doit être inserée dans la
pièce 1 * Die Batteriefeder 5 in die Endkappe 1 stecken * Inserte pieza 5 dentro de pieza 1
1
Tail cap
Achterste sluitkap
Capuchon d’assemblage
Endkappe
Tapa posterior
2 Lip Seal, tail cap
Lipafsluiting, achterste sluitkap
Joint à lèvre, Bouchon Arrière
Lippendichtung, Endkappe
Sello del Labio, tapa posterior
3 Electrical contact
Elektrisch contact
Contact électrique
Elektrokontakt
Contacto eléctrico
4 Spare lamp
Reservelamp
Ampoule de rechange
Ersatzbirne
Bombilla de repuesto
5 Battery spring*
Batterijveer*
Ressort pour pile*
Batteriefeder*
Resorte para pilas*
6 Barrel
Cilinder
Tube
Gehäuse
Cilindro
7 O-ring, barrel
O-ring, cilinder
Joint torique, tube
O-ring, Gehäuse
Junta, cilindro
8 Lamp
Lamp
Ampoule
Glühbirne
Bombilla
9 Reflector
Reflector
Réflecteur
Reflektor
Reflector
10 Clear lens
Transparante lens
Lentille incolore
Klare Linse
Lente transparente
11 O-ring, head
O-ring, kop
Joint, tête
O-Ring, Kopf
Junta, cabeza
12 Head
Kop
Tête
Kopf
Cabeza
Thank you for purchasing a Mag-Lite® Solitaire® flashlight product. To register your new Mag®
flashlight visit our website at www.maglite.com, from our home page just go to "Register Your
Flashlight". To view the entire product line click on "The Maglite® flashlight". Please review all the
information contained in this pamphlet.
OPERATION: Large end of battery spring must be snapped into tailcap. Always install
batteries with the “+” end facing the head end of the flashlight and the “-” end facing the
tailcap end of the flashlight. Switch -
Twist head. Flood To Spot — Rotate head of flashlight to
adjjust from a wide flood beam to an intense spotlight. Reverse to shut off.
Candle Mode —
Unscrew head of flashlight to expose lamp. Stand flashlight on tail cap end to create a candle effect.
Changing The Lamp - Unscrew the entire head assembly and gently pull lamp from socket. Make
sure new lamp pins are straight; insert into socket. There is a spare lamp in tail cap.
INSPECTION AND MAINTENANCE: For prolonged life and efficiency, it is necessary periodically to
inspect and perform preventative maintenance on your flashlight as follows:
1. Inspection - Any
battery may leak caustic solutions or gases which can corrode the inside of your flashlight. You
should remove the batteries at least once a month and visually inspect the inside of the flashlight for
signs of corrosion. If corrosion is seen, follow the instructions in the HOW AND WHEN TO MAKE A
To Next Page
Loading...
