What to do if my Magnani MI-HA-IHWD02-CB has no display or isn't heating?
If your Magnani Dispenser has no display or isn't heating, it's possible the thermostat has cut off. To resolve this, use the reset key to press the reset button and recover the device.
Why is my Magnani MI-HA-IHWD02-CB Dispenser leaking water?
If your Magnani Dispenser is leaking water, the drainage stopper on the bottom might be loosened. Try tightening it to stop the leakage.
How to fix error E7 on Magnani MI-HA-IHWD02-CB?
If your Magnani Dispenser's display shows 'E7', it indicates a lack of water. Fill the water tank up to the MAX mark to resolve this issue.
General| Type | Hand Dryer |
|---|---|
| Power | 1800 W |
| Voltage | 220-240V |
| Frequency | 50/60Hz |
| Air Speed | 90 m/s |
| Body Material | ABS Plastic |
| Protection Rating | IPX1 |
| Drying Time | 10-15 seconds |
| Mounting Type | Wall Mounted |
| Color | Black |
| Activation | Automatic |
To Next Page