Need help?Do you have a question about the Magnatone PANORAMIC STEREO and is the answer not in the manual?
General| Configuration | Stereo |
|---|---|
| Channels | 2 |
| Effects | Vibrato |
| Controls | Volume |
| Inputs | 2x 1/4" |
| Outputs | 1x 1/4" |
Vintage brown and gold cosmetic, 2x10" combo, 12+12 watts tube stereo amp, pitch-shifting vibrato, reverb tank, compact size.
Input 1: High Sensitivity, Input 2: Low Sensitivity.
Adjusts overall gain/volume; breakup typically around 6-7.
Treble (high frequency response) and Bass (low frequency response).
Manages the amount of reverberation effect.
Selects between pitch-shifting vibrato (FM) and tremolo (AM).
Connects an optional pedal, disabling the front panel speed control.
Adjusts the rate of the selected effect (FM or AM).
Connects external 8 Ohm speakers; internal speakers remain live.
Line level outputs compensated for DI use; requires speaker load.
Standby switch for warm-up; Power switch for on/off operation.
Details fuse type and rating for replacement.
Diagram of tube placement and list of tube types used in the amplifier.
Details on inputs, power output, gain, EQ range, reverb, vibrato, speakers, and fuse ratings.
Instructions for connecting and using the foot switch for effect control.
Covers warranty terms, limitations, and registration process.
Hot surface warning, no user-serviceable parts, take to qualified technician.
Do not expose to rain/moisture, connect to grounded outlet, avoid shorts.
Connect speaker before power on, clean with damp cloth, match impedance.
Caution regarding high sound pressure levels and permanent hearing impairment.
To Next Page
