To Next PageTo Next PageHow to fix Magnavox 19MF338B LCD TV when it has no power?
If your Magnavox LCD TV isn't turning on, try these steps: First, press the POWER button on the front of the TV or the remote. Then, make sure the AC power cord is securely connected to both the TV and the power outlet. If that doesn't work, unplug the power cord from the outlet, wait 60 seconds, and plug it back in. Finally, try plugging the TV into a different power outlet.
What to do if Magnavox LCD TV remote control not working?
If your Magnavox LCD TV isn't responding to the remote, first check if the indicator light on the TV blinks when you press buttons on the remote. Make sure you're using the remote that came with the TV. Verify that the batteries are correctly inserted according to the diagram on the remote and that they aren't dead. As a last resort, remove the TV's AC power cord from the outlet, wait 60 seconds, and then plug it back in.
Why is there no sound on my Magnavox 19MF338B?
If there's no sound coming from your Magnavox LCD TV, first, ensure the volume isn't set to zero and that the TV isn't muted by pressing the MUTE button on the remote. Check that headphones are not plugged into the TV. For AV connections, verify the Audio L/R cable is correctly connected. If using HDMI, some devices require you to enable HDMI audio output in their settings.
Why is there no picture and sound on my Magnavox 19MF338B?
If your Magnavox LCD TV has no picture or sound, make sure you've selected the correct channel. If you're using an AV connection, ensure the TV is set to the correct source input. If connected directly to the wall via coaxial cable, try running the auto-installation process again.
How to fix distorted picture on Magnavox LCD TV?
If the picture on your Magnavox LCD TV is distorted, stretched, or has black bars, press the FORMAT button on the remote to choose the best picture format. If you are using an accessory device, check its settings for picture format options.
What to do if getting error message with HDMI on Magnavox 19MF338B LCD TV?
If you're getting an error message on your Magnavox LCD TV with an HDMI connection, first, make sure your HDMI cable is certified. If the issue persists, press the SOURCE button on the remote to switch to another source and then back to the HDMI source. Try resetting both the connected device and the TV by turning them on in this order: TV, HDMI channel, then the device. As another option, while both devices are on, unplug and re-plug the HDMI cable.
How to get sound from PC on Magnavox 19MF338B LCD TV?
If you're not getting sound from your PC on your Magnavox LCD TV, connect an audio cable to the PC AUDIO IN port on the TV. Then, press the SOURCE button on the remote and select the PC source.
Why is the picture red and green on my Magnavox LCD TV?
If the picture on your Magnavox LCD TV is mostly red and green, or missing red when connected via component cables, make sure all connections are made according to the color code. Also, ensure the component cables are fully pushed into the YPbPr sockets on the TV.
General| HD type | WXGA |
|---|---|
| Display diagonal | 18.95 \ |
| Progressive scan | Yes |
| Display brightness | 300 cd/m² |
| Display resolution | 1440 x 900 pixels |
| Display technology | LCD |
| Native aspect ratio | 16:10 |
| Native refresh rate | 60 Hz |
| Supported video modes | 480i |
| Contrast ratio (dynamic) | 4000:1 |
| Contrast ratio (typical) | 800:1 |
| Display diagonal (metric) | 48.1 cm |
| Viewing angle, horizontal | 160 ° |
| SCART ports quantity | 0 |
| Common interface (CI) | No |
| Digital audio coaxial out | 1 |
| Product color | Black |
| Panel mounting interface | 100 x 100 mm |
| Headphone connectivity | 3.5 mm |
| Power consumption (standby) | 1 W |
| Power consumption (typical) | 50 W |
| RMS rated power | 4 W |
| Number of speakers | 2 |
| Tuner type | Analog & digital |
| Analog signal format system | NTSC |
| Digital signal format system | ATSC |
