Magneplanar 1.7 Instruction Manual
Quick Step-Up Instructions
The 1.7 has exceptional phase characteristics that are accomplished without the use of compensation networks. To
realize the optimum phasing, the 1.7 should be angled inward to be on-axis with the listener. (Do not place parallel to the
front wall.)In most rooms, we have achieved the best imaging with the tweeters placed on the inside.The frequency
balance should be smooth for rooms with a modest amount of damping. The enclosed resistor should be used for under-
damped rooms.
TABLE OF CONTENTS
1. Introduction
2. General Description
3. Carton Contents
4. Packaging
5. Assembly
6. Hookup
7. Caution
8. Speaker Placement
9. Bass Response
10. Stereo Width and Imaging
11. Left/Right
12. Phasing
13. Room Acoustics
14. Optional Tweeter Attenuation
15. Maintenance
16. Specifications
1. Introduction
Congratulations on your purchase. The Magneplanar 1.7 loudspeaker was conceived and designed by
perfectionists, for perfectionists. Due to the elegant simplicity and ruggedness of the design, the Magneplanar 1.7
loudspeaker will give many years of trouble-free service.
2. General Description
The 1.7 is a 3-way, full-range, quasi-ribbon design with a quasi-ribbon bass/midrange, tweeter, and super-tweeter.
3. Carton Contents
1 pair 1.7 loudspeakers
4 each feet
8 each foot bolts
8 each plastic washers
2 each 1 ohm resistors
2 each Magneplanar logos
1 each Allen wrench
1 instruction manual
4. Packaging
Save all packaging. If you need to transport the speakers, they can be shipped safely only in the original
packaging. You may never have to return your loudspeakers, but should the occasion arise, they should not be
shipped in any packaging but the original. Should you discard it, packaging is available.
To Next Page
Need help?
Speaker Specifications
Performance
Weight and Dimensions
