Need help?Do you have a question about the Magnetic Autocontrol MHTM MicroDrive Parking Pro and is the answer not in the manual?
Details the operator's duties for work safety, compliance, and barrier maintenance.
Defines required qualifications for personnel performing installation and maintenance tasks.
Highlights risks from electric voltage, crushing, hot surfaces, and moving parts.
Defines the safety distance required around the barrier arm's movement path.
Covers safety warnings, required steps, unpacking, and opening the barrier housing.
Guides on converting barrier versions, setting balancing springs, and aligning components.
Warns about dangers of electric voltage and the need for qualified personnel.
Covers installation of protective devices and connecting the main power supply.
Guides on connecting customer control lines, safety devices, inputs, and outputs.
Highlights risks during start-up and operation, including high wind conditions.
Outlines inspections required before initial start-up and during the first operation.
Emphasizes safety measures and the need for qualified personnel during maintenance.
Warns about dangers related to improper troubleshooting and handling.
Lists common malfunctions, their possible causes, corrective actions, and responsible parties.
Explains different types of messages (INFO, WARNING, ERROR) and their meanings.
Explains how to manually open or close the barrier arm during a power failure.
Emphasizes safety requirements and the need for authorized specialists for all repair work.
Details the procedure for replacing the barrier arm, including safety warnings.
General| Duty Cycle | 100% |
|---|---|
| Protection Class | IP 54 |
| Operating Temperature | -30°C to +55°C |
| Boom Material | Aluminum |
| Opening Time | 1.3 seconds |
| Closing Time | 1.3 seconds |
| MTBF | 10 million cycles |
| Drive System | MHTM™ drive unit |
To Next Page
