Magni ES1012E - User Manual

P.N.56622.B_EN
10/2020
‐‐ORIGINALINSTRUCTIONS‐‐
Drafted in accordance with the essential requirement of health and safety 1.7.4 of Annex I to Directive 2006/42 / EC
SELF-PROPELLED SCISSOR LIFTS
OPERATOR’S MANUAL
with Maintenance Information
(For ES0808H / ES1008H / ES0812H / ES1012H / ES1212H / ES1412H / ES1612HLB / ES1612HCP)
(For ES0808E / ES1008E / ES0812E / ES1012E / ES1212E / ES1412E / ES1612ELB / ES1612ECP)
( Hydraulic Motor / DC Motor Drive )
WARNING
THE MANIF
ACTURER SHALL NOT BE HELD LIABLE IN CASE OF
FAULTS OR ACCIDENTS DUE TO NEGLIGENCE, INCAPACITY,
INSTALLATION BY UNQUALIFIED TECHNICIANS AND IMPROPER USE
OF THE MACHINE.
DO NOT OPERATE THIS MACHINE UNTIL YOU READ AND
UNDERSTAND ALL THE DANGERS, WARNINGS AND CAUTIONS IN
THIS MANUAL.

Summary

Safety Rules and Precautions

General Safety Precautions

Essential rules for safe machine operation and hazard avoidance.

Hazard Identification and Prevention

Covers electrical, stability, work area, crushing, fall, and collision hazards.

Component and Battery Safety

Addresses bodily injury, battery hazards, explosion, and fire risks.

Transport and Storage Safety

Guidelines for safely storing and transporting the machine.

Machine Specifications

ES0808 H Specifications

Detailed technical specifications for the ES0808H model.

ES1412 H Specifications

Detailed technical specifications for the ES1412H model.

ES1612 ELB Specifications

Detailed technical specifications for the ES1612ELB model.

Control Panel Functions

Ground Control Panel

Description of controls and functions on the ground control panel.

Platform Control Panel

Description of controls and functions on the platform control panel.

Operation and Testing Procedures

Pre-operation Inspection

Visual inspection procedures before each work shift.

Function Tests

Procedures to test all machine functions before service.

General Operating Instructions

Guidelines for machine operation, driving, lifting, and emergency procedures.

Troubleshooting Fault Codes

Explanation of error indicators and fault codes for diagnostics.

Maintenance Procedures

Maintenance Schedule and Symbols

Overview of maintenance intervals and usage of maintenance symbols.

Routine and Periodic Inspections

Procedures for daily, periodic, and component inspections.

Hydraulic System Maintenance

Tasks related to hydraulic oil, filters, and breather caps.

Schematics

Hydraulic Schematics

Diagrams illustrating the hydraulic system of various models.

Electrical Schematics

Diagrams illustrating the electrical system of various models.

Magni ES1012E Specifications

General

Overall Length	2.48 m
Battery Voltage	24 V
Gradeability	25%
Turning Radius	0 m
Ground Clearance	0.1 m