Magnolia Home 35000007 User Manual

Page: 1/2
Made in Vietnam
Cleaning instructions: Clean using soft cloth
Read instruction carefully prior to assembly.
Thank you for purchasing this quality product. Check carefully for small parts which may
come loose during shipment.
Remove all components from pack and place top down on soft surface such as carpet or
cloth to prevent scratching the finish. Identify and count all parts as specified below.
It is recommended to use two or more persons during the assembly process.
2
3
ASSEMBLY INSTRUCTIONS
HARDWARE LIST:
No.
Description
Qty
Sketch
Size
8 pcs
B
1 pc
8 pcs
A
C
D
8 pcs
8 pcs
E
4 x 30mm
Screw
Hex Nut
Open Wrench
12 mm
8 x 25mm
Curve Washer
Thread bolt
ɸ
5
16
'' x 80mm
ɸ
5
16
'' x 12mm
PARTS LIST:
Qty
Description
No.
Sketch
1
HEADBOARD
PANEL
1 pc
5
SIDERAIL
2 pcs
5 pcs
3
FOOTBOARD
4
SLAT
1 pc
SLAT SUPPORT
10 pcs
STEP 1:
GROUP NO.: 35000007 ARCHITECTURAL BR
ITEM NO.: 3570301R HEADBOARD, 5/0 PANEL, STRATUM-RANCH
3570204R RAILS, 5/0-6/6 UPH, STRATUM, RANCH
3570303R FOOTBOARD, 5/0 UPH, STRATUM-RANCH
3570311R HEADBOARD, 6/6 UPH PANEL, STRATUM-RANCH
3570313R FOOTBOARD, 6/6 UPH, STRATUM-RANCH
1
2
ASSEMBLE SIDE RAILS (3) TO HEADBOARD PANEL (1) AND
FOOTBOARD (3) BY USING THREAD BOLT (A), CURVE
WASHER (B), HEX NUT (D) AND OPEN WRENCH (E).
Tool Required Phillips Head
Screw Driver (Not Provided)
1
3
2
5
4

Magnolia Home 35000007 Specifications

General

Brand	Magnolia Home
Model	35000007
Category	Indoor Furnishing
Language	English

Summary

Assembly Process

Step 1: Connect Main Frame Components

Assemble side rails to headboard and footboard panels using thread bolts, washers, and hex nuts.

Step 2: Attach Slat Supports

Attach slat supports to the slats, then place the slat rolls onto the middle of the bed frame.

Step 3: Secure Slats

Secure the slats to the frame using screws with a screwdriver, ensuring they are properly fastened.