Need help?Do you have a question about the Magnum Industrial MI-91350 and is the answer not in the manual?
General| Type | Sliding Compound Miter Saw |
|---|---|
| Blade Diameter | 12 in |
| Arbor Size | 1 in |
| Amperage | 15 Amps |
| Voltage | 120V |
| No Load Speed | 4, 500 RPM |
| Cord Length | 6 feet |
| Bevel Angle Range | 0-45 degrees |
Comprehensive safety guidelines for operating the band saw.
Identifies and labels the key parts of the band saw.
Steps before assembly, including checking parts and setup requirements.
Proper procedures for safely moving and positioning the band saw.
Guidelines for selecting an appropriate and safe location for the machine.
Creating a designated safe area around the operating machinery.
Methods for cleaning the saw table and protecting it from rust.
Guidelines for connecting the saw to power and safety switch operation.
Steps to securely mount the band saw unit onto its base cabinet.
Procedure for attaching the blade tension adjustment lever.
Instructions for installing the bracket that allows table angle adjustments.
Procedures for mounting the main work table onto the tilt bracket.
Steps for installing dust collection port, fence, and mitre gauge.
Details on cutting capabilities and the power on/off switch.
Steps for connecting the band saw to the electrical supply.
Procedures for setting the table to 90 degrees and tilting for bevel cuts.
Steps for safely removing and installing the band saw blade.
Detailed steps for correctly installing a new band saw blade.
How to set and check the correct tension for the band saw blade.
Steps for aligning the blade on the wheels and setting the blade guard height.
Guide to selecting the appropriate speed setting for different cutting tasks.
Regular inspection, cleaning, and lubrication tasks for the band saw.
Details on warranty coverage, exclusions, and claim procedures.
Guidance on manual use and limitations of liability.
To Next Page
