Need help?Do you have a question about the Magnum Industrial MI-91500 and is the answer not in the manual?
General| Blade Diameter | 10 inches |
|---|---|
| Motor | 15 Amp |
| Voltage | 120V |
| Arbor Size | 5/8 inch |
| Max Cut Depth at 45 degrees | 2.25 inches |
| No Load Speed | 4800 RPM |
General safety guidelines for operating the band saw.
Overview of the band saw's main components with labels.
Instructions for assembling the band saw.
Proper procedures for lifting and moving the band saw.
Guidance on selecting a suitable location for the band saw.
Creating and marking a safety area around the machine.
Steps to clean the band saw after initial setup.
Mounting brackets for storing accessories like rip fence and miter gauge.
Step-by-step instructions for installing the worktable.
Completing the table installation process.
Instructions for installing the fence and guide rail system.
Attaching and understanding the function of the foot brake.
Adjustments for the band saw.
How to adjust the table angle for bevel cuts.
Setting the 90-degree stop and aligning the angle indicator.
Detailed steps to adjust the table angle.
Fine-tuning the 90-degree stop and angle pointer.
Setting the correct clearance for blade guide bearings.
How to change the band saw's operating speed.
Adjusting the blade guard height relative to the workpiece.
Maintenance procedures for the band saw.
Routine maintenance tasks and lubrication points.
Conversion guide from 110V to 220V operation.
Detailed steps for modifying components during voltage conversion.
Final steps for voltage conversion, including plug modification.
Comprehensive list of parts for the MI-91500 band saw.
Additional parts listing for the MI-91500 band saw.
Final part listing for the MI-91500 band saw.
To Next Page
