Need help?Do you have a question about the Magnum H64 and is the answer not in the manual?
General| Brand | Magnum |
|---|---|
| Model | H64 |
| Category | Control Systems |
| Language | English |
Identify the optimal position near the distributor and power point, then open the control unit.
Drill holes for mounting, secure the back plate, and reattach the cover plate after wiring.
Details the wiring for thermostats, actuators, pump, and passive connections.
Prepare the thermostat by opening the back plate and connecting the wiring.
Secure the thermostat back plate with screws and place the thermostat onto it.
Verify correct master and slave thermostat connections after installation.
Address 'Display off' and 'FX' errors by checking wiring and swapping thermostat connections.
Understand the meaning of LEDs on the H64-CC control unit for heating and pump status.
Learn about symbols on the thermostat display and how to use the buttons.
Details program modes, system symbols, frost/pump protection, and error codes.
Technical specifications for the H64-CC control unit, including power, dimensions, and IP class.
Technical specifications for H64-MT and H64-ST thermostats, including power, WiFi, and dimensions.
Search for the HeatLink app, install it, and create a new user account.
Verify your email address, set a password, and enable notifications for proper operation.
Ensure thermostats are connected and initiate the addition process via the app.
Select your 2.4GHz Wi-Fi network and enter the password to proceed.
Reset the device, wait for connection, and name the system for easy identification.
Confirm thermostat additions, organize them, and view the home screen overview.
Learn specific commands for controlling the system with Amazon Alexa and Google Assistant.
To Next Page