How to improve the visibility of the laser line on Magnusson 3663602850793?
If the laser line is hard to see on your Magnusson Laser Level, it could be because the area is too bright. Try using the laser level in a dimmer area.
What to do if the laser line is not level on my Magnusson Laser Level?
If the laser line on your Magnusson Laser Level isn't level, first ensure the level bubbles are properly aligned and centered. Also, check that the meter is mounted on an even base, making sure the leveling bubbles are level after mounting.
Why my Magnusson 3663602850793 Laser Level cannot start?
If your Magnusson Laser Level meter cannot start, it might be due to incorrectly inserted batteries. Please, re-insert the batteries correctly. Another possible cause is a low battery. In that case, replace the old batteries with new ones.
What to do if Magnusson Laser Level projects a horizontal line instead of vertical?
If the laser line is horizontal when you need a vertical line on your Magnusson Laser Level, it's likely that the laser meter is in the incorrect position. Turn the meter 90° to the vertical orientation to correct this.
Essential safety guidelines and warnings for laser product operation.
Instructions for operating the laser in line mode, including setup and levelling.
Guidance on using the laser for point projection and levelling tasks.
General| Brand | Magnusson |
|---|---|
| Model | 3663602850793 |
| Category | Laser Level |
| Language | English |
To Next Page
