The auto wipe button is located in the switch bank under the HVAC controls. Press
the button to enable the auto wipe;
• Front wiper will wipe once to indicate the entry into automatic mode
• Front wiper will wipe according to the rain intensity
Keeping the wiper in low/high speed will deactivate the auto mode.
8.28.8 Rear Wiper (if equipped)
Rotate the outer rotary switch (F) on the wiper control stalk to align the ‘arrow’ on
the switch to rear wiper symbol on the wiper stalk to operate the rear wiper.
If you switch OFF the ignition before switching OFF the wiper, the blades stop at
random on the windshield. Switch ON the ignition and move wiper stalk to the
'MIST' position to return the wipers to the park position, provided the wiper
stalk is in the OFF position.
8.28.9 Wipe/Wash
To Next Page
Loading...
Need help?
General
