14-24
© Copyright Mahindra & Mahindra Ltd.012016
• Detach the bulb assembly from the head lamp by unlocking the
wire clamp
• Insert the new bulb (of the same wattage), and follow the reverse
procedure to assemble the bulb assembly in the headlight
assembly
• Clamp the bulb assembly by wire clamp properly
Do not touch the new bulb with your fingers. Oil contamination
will severely shorten bulb life. If the bulb comes in contact with
any oily surface, clean the bulb with rubbing alcohol.
To avoid burning yourself, do not replace the light bulbs when
they are hot. Halogen bulbs have pressurized gas inside and
are to be handled with special care. Mishandling it may cause
the bulb to burst or shatter. Hold the bulb with its metal/plastic
holder/base and do not touch the glass part with bare hands.
MAINTENANCE
To Next Page
Loading...
Need help?
General
