Diagnostic Manual ( EMS) LCV MDI BSIII CRDe
Rev 01- Mar 14
All copyrights reserved by
The repair methods given by the manufacturer in this document are based on the technical specifications current at the time of release.
The methods may be modified as a result of changes introduced by the manufacturer in the production of the various component units
and accessories from which the vehicles are manufactured. The reproduction, translation, transmission, in part of whole of the present
document, are prohibited without the prior written consent of 2014 Mahindra & Mahindra Ltd (Truck & Bus Division)
TO CHECK TO RECTIFY
1. Crank Sensor connection 1.Remove and connect again
2. Electrical wiring 2.Terminal backout, wire open circuit &
short circuit
3. Sensor malfunctioning 3.Clean / Change sensor
4. Air Gap 4.Put Copper washer
5. Engine Cam shaft / Crank Shaft timing 5.Check timing and rectify
6. Flywheel Teeth Dimension / Flywheel
reference
6. Clean / Change wheel. Check flywheel
reference
P0335
P0336
P0371
P0372
To Next Page
Loading...
Need help?
General
