Mahindra E2O User Manual

If ‘REVive’ is already activated and enabling
again will display above screen. Wait till you
observe ‘REVive’ successful display.
7.3 REVive*
My car info & Mobile App
56
REVive* is a feature to enable reserve energy
when you run out of charge.
1. REVive is activated if SOC is <10%
2.REVive can be activated by infotainment
system.
To activate:
a) Select ‘Gear Lever’ to neutral.
b) Select press to REVive
REVive will get activated with revived SOC
and DTE
Try again once ‘SOC’ becomes less than 10%
to enable ‘REVive’.
F
any of below messages.
1. REVive time out
2. SOC greater than 10%
3. REVive already set
4. Vehicle not in neutral
5. Vehicle not authenticated
6. REVive limit exceeded
7. Vehicle de-activated
8. Drive stop fault
Try again with valid set conditions.
or unsuccessful attempts it will display
Try again to enable ‘REVive’ within time
limit with set conditions.
Please note that ‘REVive’ feature can be
enabled with limitation and user charges
as applicable.
NOTE
57
My car info & Mobile App
7.3 REVive
For vehicle deactivated message while
activating ‘REVive’ Contact Technical help
desk for support and assistance.
For drive stop error message while
activating ‘REVive’, contact Technical help
desk for support and assistance.
Authenticate vehicle and try again to
enable ‘REVive’ with other set conditions.
Shift gear lever to neutral mode and try
again to enable ‘REVive’ with other set
conditions.
This screen displays that ‘REVive’ cannot be
done as number of ‘REVive’ used in vehicle
have crossed limit.
By accessing ‘manual’ menu you can access
user manuals & trouble shooting guide.

Mahindra E2O Specifications

General

Brand	Mahindra
Model	E2O
Category	Automobile
Language	English