Mahindra E2O - Starting

Starting and driving
70
9
STARTING AND DRIVING
9.1 Starting..............................
9.2 Driving...................................................................
9.3 REVive...................................................................
9.4 Hill Hold.................................................................
9.5 Extending Your Driving Range ..............................
9.6 Troubleshooting.....................................................
....................................
71
72
73
73
73
74
9.1 STARTING:
Check energy level on SOC bar and digital SOC
display. Ensure that there is enough charge for
your immediate journey.
Eight simple steps to get your car started &
ready to drive:
Step 1: Turn off power supply and remove plug
from wall socket.
Step 2: Open rear hatch and unplug charge cable.
Roll it & keep inside vehicle.
Step 3: Unlock door using remote key fob.
Starting & driving
71
9.1 STARTING
Step 4: Turn on start button.
Step 5: Authenticate key by placing key fob
near to start button as shown
above with position arrow on key
fob.
Step 6: Ensure seat belts are fastened.
Step 7:By pressing gear release button,
select gear lever to desired
driving position.
Step 8:Release parking brake, press
accelerator pedal. Use only your
right leg for applying accelerator
& brake pedals.
STEP 6
STEP 8
R
N
F
B
R
N
F
B
STEP 2
GEAR LEVER
1
2
PARKING BRAKE
STEP 7
GEAR LEVER RELEASE BUTTON
STEP 5
START
position
this way for
Authentification
ON
START
STOP
STEP 4
STEP 3
Press
STEP 1