STEP 5: Assemble the Frame and the Desktop from other brand
STEP 6: Install the Adapter and Fixture
P7
Hardware List
5
ST5*0.8*16
Tapping Screw
×8
7
Screwdriver
Hardware List
5
ST5*0.8*16
Tapping Screw
×2
7
Screwdriver
Tighten the
2 screws
·If the desktop is from other brand (We recom-
mend to use a 25mm or thicker third-party
desktop to avoid cracking the top ), put the
frame on the axis on the desktop and adjust
both lifting columns to proper positions.(It’s
recommended that the distance between the
side bracket and the edge of the desk be 5cm)
To Next Page
Loading...
