Need help?Do you have a question about the Maier 220 and is the answer not in the manual?
General| Buttonhole | 1-step |
|---|---|
| Weight | 6.5 kg |
| Voltage | 220-240V |
| Power | 70W |
| Bobbin | Top-loading |
Details applicable European regulations and statutory provisions for machine operation.
Crucial safety guidelines for machine operation, maintenance, and personnel.
Details the duties and safety requirements for machine operators.
Outlines responsibilities and safety protocols for maintenance and repair personnel.
Detailed guidance for the proper installation of the sewing machine and its parts.
Detailed instructions for threading the sewing machine, with and without thread cutter.
Technique for sewing blind stitch hems directly on the edge of the fabric.
Method for sewing blind stitch hems on a folded section of the fabric.
Specific guidance on setting stitch depth for these machine classes.
How to adjust the cloth guide for precise positioning of fabric for blind stitching.
Adjusting the stitch depth for the left-hand plunger for outer hem penetration.
Adjusting the stitch depth for the right-hand plunger for inner hem penetration.
Guidance on adjusting the stitch plate for accurate needle and feed dog positioning.
How to set the correct vertical position of the looper relative to the needle and stitch plate.
Ensuring the correct horizontal placement of the looper for proper thread engagement.
Ensuring the plunger stops correctly in front of the needle during its cycle.
Aligning the plunger precisely under the cloth retainer for consistent stitch formation.
To Next Page
